Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Instruction Manual ES 50 plus
_______________________________________________________________________________________________________________________
Pull the plug of the charging unit after charging. Do not
disassemble the charging unit or battery.
In order to safeguard a safe and proper performance of the
charging unit the repair and service of the unit should be made
through our Service Centre.
5.5 Storage and transport of the cutting tool
In order to protect the tool against damages it has to be cleaned
carefully after each use and be put into the transportation case Part
No. MKE 50 which has to be closed safely.
6. Troubleshooting
a.) Flashing of the light diode display (Pos.-No. 6)
=> See chapter 4.3 for more information about the special
functions of the tool.
b.) The tool loses oil.
=> Return the tool to the manufacturer. Do not open the tool and
damage the seals of the tool.
c.) The cutting tool does not reach the final operating pressure.
=> Stop the cutting process. Press the retract button (Pos.-No. 2)
and the operating switch continuously and simultaneously for
about 10 sec. Is the malfunction not be eliminated by this
attempt the tool has to be returned to the manufacturer.
7. Putting out of operation/waste disposal
The disposal of the various components of the tool has to be
treated separately. First you have to dispose of the oil at special
delivery points.
Attention
Hydraulic oils represent a danger for the ground-
water. Uncontrolled draining of or improper
disposal is under penalty.
(environmental liability law)
Next, the battery cartridge (Pos.-No. 7) has to be specially
disposed of according to the EEC Battery Guideline.
For the disposal of the remaining parts please reference the EC
environmental guideline.
Because of possible environmental damages we recommend to
dispose of the tool by professional companies.
Attention
Do not dispose of the unit in your residential waste
because it will finally end up on the waste dump
which would be hazardous for the environment.
A return of the old tool free of charge to the manufacturer cannot
be granted.
All manuals and user guides at all-guides.com
8. Technical Data
Weight of the complete tool:
Cutting force:
Maximum cutting diameter:
Driving motor:
Battery voltage:
Battery capacity
Charging time:
Cutting time:
Cuts per battery:
Hydraulic oil:
environmental temperature:
Sound level:
Vibrations:
Dimensions:
Additional instruction manuals are available free of charge. The part # is
HE.4380_G.
page 8
approx. 6,3 kg (incl. battery)
approx. 50 kN
∅ 50 mm (e.g. 4 x 150 mm² NYY)
direct-current permanent field motor
12 V
2,6 Ah
approx. 1 h (LG 4),
¼ h with Quick-charger (LG 5)
approx. 9 s to 20 s
(depending on the cable size)
approx. 55 cuts (4 x 120 mm² NYY)
approx. 65 ml "Shell Tellus T 15"
-20°C to –40°C
70 dB (A) in 1m distance
< 2,5 m/s²
See Picture 2
Advertenties
Inhoudsopgave
