Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Rear panel
1.
YUV output
2.
S-Video output
3.
Video output
4.
2 CH L/R output
5.
Coaxial output
For the video output of the DVD player, you can use the S-VHS socket (2). You can also
connect one or two monitors to the video outputs.
If you wish to send the sound e.g. to a monitor, you can send the stereo audio signal to the
stereo RCA sockets (4)
The connectors on the rear side allow you to send the 5.1 audio signal of the DVD player to an
external amplifier. This signal can be fed through the optical output (6), the coaxial output (5).
The selected connection depends on your personal taste and the facilities of your amplifier.
The 6.35mm jack sockets LINE IN (10) and LINE OUT (9) are for connection to external units.
Operation (front side)
1.
After switching the unit on, it carries out a self test. The LED indicators 7 & 8 should
flash 3 times at the same time to indicate this process. The LED row #6 displays the
voltage of the built-in battery.
2.
Press the EQ switch (2) to switch the equalizer on or off. The LED lights up when the
equalizer is switched on.
3.
If you wish to use one or more microphones, you have to switch this option on via the
button (3). The LED lights up when the microphone is activated.
4.
If you wish to use the DVD player, you need to switch this option on via the switch (4).
The LED lights up when the DVD player is activated.
5.
If you wish to use the cassette player, you need to switch this option on via the switch
(5). The LED lights up when the cassette player is activated.
6.
Optical output
7.
Mains connector
8.
12/24 VDC input (optional)
9.
Line output
10. Line input
Advertenties
Inhoudsopgave
