Download Inhoudsopgave Inhoud Print deze pagina

Setting Display Language; Setting Temperature Unit; Setting Min/Max Temperature Values - VOLTCRAFT TM-500RF Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

All manuals and user guides at all-guides.com
• You can wait until the base station has found the remote sensor or you press the button
"SYN"
(21) inside the battery compartment (20) of the remote sensor. The syncing starts
immediately.

11. SETTING DISPLAY LANGUAGE

You can switch the display language between German and English.
• Press and hold the button
• The display switches between German and English.

12. SETTING TEMPERATURE UNIT

• Briefly push the button "C/F" (4) at the base station to switch the temperature unit between °C
(degrees Celsius) and °F (degrees Fahrenheit).
• To switch the remote sensor display between °C and °F, briefly push the button "C/F" (19) in the
battery compartment of the remote sensor (20).
The setting of the temperature unit for base station and remote sensor is independant.

13. SETTING MIN/MAX TEMPERATURE VALUES

1. Press the button
"SET"
of the base station and the MAX value starts blinking.
2. Use the buttons
"+"
value is -50 °C.
3. Press afterwards the button
4. Use the buttons
"+"
5. Press the button
"SET"
When the measured temperature of the remote sensor drops below or exceeds the set
values, the backlight of the base station starts blinking and the buzzer becomes active.
Press the button "BACKLIGHT/ALERT
deactivated by default.
When the temperature drops below -50 °C or exceeds +120 °C, the LC display shows
"Lo"
or respectively "Hi".
Press and hold the button "BACKLIGHT/ALERT
in order to activate/deactivate the buzzer. One single beep means, that the buzzer is
deactivated. Two beeps mean, that the buzzer is activated.
"C/F"
(4) for about 3 seconds.
(3) to enter the setting mode. The symbol SET lights up in the LC display
(5) or
"-"
(6) to set the desired temperature value. The default temperature
"SET"
(3) to set the MIN value.
(5) or
"-"
(6) to set the desired temperature value.
(3) to save the values and exit the setting mode.
STOP"
(2) to deactivate the alarm. The buzzer is
STOP"
(2) for approx. three seconds
25

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

10 34 34

Inhoudsopgave