Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
DESCRIPTION
DESCRIPTION OF THE ART 5W GTWIN MONITOR
Hands-free monitorfor the GTWIN system with button and coded panels.
a
b
c
d
e
f
a.
Speaker.
b.
5" TFT colour screen.
c.
During call reception and communication proccesses, it enables the main lock release to be activated.
d.
With the monitor in standby mode: one short press it activates/ desactivates the "do not disturb" mode and the
indicator led will illuminate (red).
e.
During a call, communication or auto-spy process: it enables the secondary door release to be activated: one press
will activate the door release for 1 second.
f.
Scroll push buttons for configuration menu.
g.
Up to 32 video calls stored in monitor memory. Allows to copy these video calls to a micro SD slot (not included).
Type: Micro SD Class 10 from 4GB to 128 GB.
h.
Start/ stop communication push button. With monitor in standby, it
i.
Access to configuration and function menu: With monitor in standby 2 short press to access to configuration menu or
1 press to access the function push buttons.
j.
Function push buttons.
k.
Microphone.
l.
Connector fixings.
m.
Configuration jumpers.
n.
Connection terminals.
FUNCTION PUSH BUTTONS
Monitor in stanby mode: one short press it activates/ desactivates the "do not disturb" mode and the led will illuminate (red).
Monitor in standby mode: allows you to display the image from the main door panel, press the button
press the button
(if the channel is busy, short acoustic tones on the monitor will indicate it), if the button
pressed again, the image of the secondary door panel will be displayed, in carousel mode. Then, if you press the
button
, you can establish audio and video communication with the selected door panel.
During a call process: it allows the secondary monitors (in the same apartment) to capture the door panel image, with
the image of the monitor that was displaying it disappearing.
Monitor in standby mode: it allows the intercom between 2 monitors of the same or different apartment (this function
must be programmed previously, see "TART 5W/GTWIN" manual). Press the button
and select the apartment or a monitor in your apartment to be called.
Monitor in Standby mode: to make a call to the guard unit, press the button
During call reception and communication or auto-spy processes, it enables the main lock release to be activated.
During call reception and communication or auto-spy processes, it enables the secondary lock release to be
activated, one press will activate the door release for 1 second.
g
l
INT
CODE
m
JP1
JP2
JP3
1 2
3 4 5 6
7 8 1 2
V-
HZ
h
V+
HZ
n
GND
NC
SA
i
BUS
OUT
BUS
j
IN
l
k
allows
the intercom.
, then press the button
and then press the button
2
DESCRIPTION
DESCRIPTION
OF THE
BUS
BUS
NC
OUT
IN
BUS IN:
Communication bus input to monitor (non-polarised).
BUS
OUT:
Communication bus output to additional monitor/telephone
(non-polarised).
NC:
Do not connect, without use.
HZ:
Door bell button input.
DESCRIPTION OF THE CONFIGURATION JUMPERS
l
( )
*
JP1
Monitor with JP1 jumper place to right, takes the current from system power supply
Monitor with JP1 jumper place to left, takes the current from dedicated power supply "1723/22".
n
( )
*
JP2
n
Monitor with JP2 jumper place to left, low power
Monitor with JP2 jumper place to right (High power) with use of dedicated power supply "1723/22".
( )
*
JP3
l
Monitor with JP3 jumper place to left, has the end of line connected
Monitor with JP3 jumper place to right, has the end of line disconnected.
( )
Factory default.
*
OPERATION
- Call reception: Durring call reception, the image will appear on the master monitor and the push buttons led
the master
and slave/s monitors will illuminate (green color). If the call is not answered within 60 seconds,
buttons
,
and
of the master and slave/s monitors will turn off. Led
will become free.
- To stablish communication, press
will illuminate and the led
on the door panel will trun off.
-
Guaranteed communication time is 90 seconds (configurable); after 90 seconds of guaranteed communication time, the channel
will become free.
-
To end communication, press button
the channel will become free.
-
To open the main or secondary door, press the corresponding door release button
communication processes: one press will activate the lock release for 1 second (configurable main door) and, with the
opening of the main door, LED
INSTALLATION OF THE MONITOR
Avoid dusty or smoky environments or locations near sources of heat. The monitor can be fixed to an electrical embedding
Important:
box or directly to the wall.
once, then
Location
is
1.60m
.
Re
member to remove the protective covering from the front of the monitor once installation is complete
EN
CONNECTION TERMINALS
SA
V+ V
HZ
SA /GND :
Output (open normally contact "N.O")
to auxiliary call repeater SAV-GTWIN.
V+:
Input (positive) external power supply "1723/22".
V-:
Input (negative) external power supply "1723/22".
(factory default)
.
(factory default)
on the door panel
button
on the monitor, push button led
will blink (green color), led on the door panel
, the monitor push buttons led
,
&
will also illuminate for 1 second.
For further information, see the
"TART 5W G
Surface
4 30
x
3
_
(factory default)
.
.
,
&
of
the leds from push
will turn off and the channel
and door panel led
will turn off and
/
during the call or
TWIN
" manual.
Embedding box
Screws supplied with
the embedding box.
.
EN
Advertenties
Inhoudsopgave
