Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
This machine can be used for wet and dry pick up.
If the vacuum cleaner stops working switch off and remove the plug from the wall before
investigating were the fault lies.
If the vacuum cleaner will not pick up any debris from the surface, switch off and remove the plug from the wall,
inspect the floor tool, wands and hose for blockages, if no blockages are found, the dust bag may be full if the
dust bag is not full the filter may be blocked.
If the vacuum cleaner stops working switch off and remove the plug from the wall before investigating were the
fault lies.
If the vacuum cleaner has a blockage and will not pick up liquid, switch off and remove the plug from the wall,
has the float valve operated, this will shut off the suction and the pitch of the vacuum motor will change Remove
the power head and empty the liquid out of the container, if the container is empty, check that the floor tool
wands and hose are not blocked.
After use always inspect the machine for damage.
Motor
CVC 370
1200W
WV 370
1200W
WV 470
1200W
Capacity
Dry
CVC 370
15 Ltrs
WV 370
15 Ltrs
WV 470
27 Ltrs
Failure to rectify the problem or in the event of a breakdown contact your
Numatic dealer or the Numatic Technical helpline +44 (0)1460 269268
All manuals and user guides at all-guides.com
AirFlo
Suction
40 L/sec
40 L/sec
40 L/sec
Capacity
Wet
9 Ltrs
355x355x510
9 Ltrs
355x355x510
20 Ltrs
355x355x710
Fault Finding / Dry Mode
Fault Finding / Wet Mode
Cleaning
Range
2500 mm
28.8m
2500 mm
28.8m
2500 mm
28.8m
Size
Weight
7.1 Kgs
7.1 Kgs
9.6 Kgs
Data
Class
II
Sound
Pressure
73-77 dB
(IEC 60704-2-1)
Uncertianty: 0.2 dB (A)
Advertenties
Inhoudsopgave
