Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
GB
decreases, the core bit can be re-sharp-
ened using a sharpening stone (acces-
sory).
Drilling with Drilling Jig
The drilling jig, which is available as an
accessory, is essential as a drill starter for
precision drillings and avoids damage
being caused to the material surface. Mark
the drilling location. Adjust the drilling jig
to the diameter of the core bit and fasten
the jig above the drilling location. Insert
the switched off machine with the core
bit into the drilling jig. Hold the machine
straight while drilling.
MAINTENANCE AND
CLEANING
• For safe and .proper working, always
keep the machine and the ventilation
slots clean.
• Clean and lubricate the tool holder
regularly.
• Check the machine regular for tight-
ness against leaks. The machine may
no longer be used when water comes
out of the control opening 3 behind the
water supply connection.
If the machine should happen to fail
despite the care taken in manufacture and
testing, repair should be carried out by an
authorized customer service agent.
DIAMOND3
For all correspondence and spare parts
orders, always include the article number
on the type plate of the machine.
ENVIRONMENTAL
PROTECTION
agement organisation. Adhere also to the
applicable regulations. In case of doubt
refer to your waste management organisa-
tion. Recycle all packaging material in an
environmentally friendly manner.
NOISE/VIBRATION
INFORMATION
Typically the A-weighted noise levels of the
product are:
• sound pressure level: 96 dB (A) NEN-
• sound power level: 105 dB (A) NEN-
The typical weighted acceleration is 2,5
m/ s2 (EN 5349).
DECLARATION OF
CONFORMITY
We declare under our sole responsibility
that this product is in conformity with the
following standards or standardization
documents:
NEN-ISO 11204/prEN 31204,
NEN-ISO 3744, EN 5349-1, NEN
16
FB750W
®
Do not dispose of the appliance
with domestic waste. Dispose of
the appliance only via an author-
ized waste management compa-
ny or your municipal waste man-
ISO 11204/prEN 31204
ISO 3744.
Wear ear protection!
Advertenties
Hoofdstukken
Inhoudsopgave
