Download Inhoudsopgave Inhoud Print deze pagina

Tool Specifications; Machine Elements; Intended Use - B+BTec PROFESSIONAL Diamond3 FB750W Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

All manuals and user guides at all-guides.com
DIAMOND3
• On construction sites, electrical machin-
ery may only be supplied with power
via a construction site distribution
board or a separate isolation trans-
former.
• When water comes out of the control
opening 3, stop working immediately
and have the machine checked by an
authorized customer service agent.
• If the cable is damaged or cut through
while working, do not touch the cable
but immediately pull the mains plug.
Never use the machine with a dam-
aged cable.
• Only insert the plug when the machine
is switched off, and unplug after use.
• Switch off the machine if it should
come to a stop for any reason. After
a break or an interruption from work,
only switch the machine on after hav-
ing made sure that the core bit rotates
freely.
• Always use the auxiliary handle and
hold the, machine with both hands.
Be aware of the machine's reaction
torque.
• When starting the drilling, do not
guide the drill by hand. The machine
can injure you, resulting in loss of con-
trol. Work only with a drill-starter or the
drilling jig 14.
• Wear safety goggles .and hearing
protection. Wear protective gloves.
• Take care with long hair. Only work
with closely fitting clothing.
• The machine may not be operated by
persons under the age of 16 years.
FB750W
®

TOOL SPECIFICATIONS

Tile drill . . . . . . . . . . . . . . . .FB750W
Rated power . . . . . . . . . . . . . . 750 W
No-load speed . . . 3000 - 10000 min
Water connection . . . . 1/4" rapid-action
. . . . . . . . . . . . . . . . . coupling
Drilling diameter . . . . . . . . Ø4 - 68 mm
Dimensions (LxBxH) . . 350x190x180 mm
Weight, approx. . . . . . . . . . . . 2.6 kg
Protective measure in
case of wet operation . . . .PRCD residual
. . . . . . . . current device 10 mA

MACHINE ELEMENTS

1 Diamond core bit*
2 Locking screw
3 Water Injection Head control opening
4 Handle screw
5 Auxiliary handle
6 On/Off switch
7 Speed controller
8 Hose coupling with water cock*
9 Water supply connection
10 Reset button for PRCD residual current
device
11 Test button for PRCD residual current
device
12 Control light
13 Allen key (3 mm)
14 Drilling jig
15 Water Tank
* Not all of the accessories illustrated or
described are included as standard delivery.

INTENDED USE

The machine is intended for wet drilling in
tiles and natural stone slabs/flagstone with
the use of diamond drill bits or original
diamond tile core bits.
The user is responsible for damage caused
by usage other then intended.
13
GB
-1

Advertenties

Inhoudsopgave
loading

Inhoudsopgave