Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
•
The distance between two objects (e.g. wall and shelf) must be at least 40 cm so that
the device can get through.
•
The device can get stuck under furniture which it can just about get under. Block its
path, for example, with fl ower pots that are heavy enough not to get knocked over.
Starting the Device
1. Make sure that the dust container (1) is empty, the device is free of any contamination
(see the "Cleaning, Maintenance Work and Storage" chapter) and the battery is
charged up.
2. If necessary, fi x a dust cloth to the attachment for the dust cloth (10) if you want to use
the device on hard fl oors, or remove the attachment for the dust cloth (see the "Using
the Dust Cloth" section) if you want to use the device on a carpet.
3. Place the robot vacuum cleaner on the fl oor.
4. To switch on the robot vacuum cleaner, move the On/Off switch (4) to position I.
5. To switch off the robot vacuum cleaner, move the On/Off switch to position 0.
6. After each use, empty the dust container and remove any contamination (see the
"Cleaning, Maintenance Work and Storage" chapter).
Cleaning, Maintenance Work and Storage
CAUTION!
■
During cleaning and maintenance work, the device must not be connected to the
mains power and must be switched off!
■
Only the dust container may be rinsed out. The device must not be immersed in water
or any other liquids. Make sure that all parts are completely dry before you insert the
dust container back into the device!
■
Do not use any caustic or abrasive cleaning agents for cleaning. These can damage
the surface.
1. Before and after every use, make sure that
– the nozzle and ventilation openings are clear,
– the sensors on the bottom of the device are clear of dust etc.,
– the dust cloth has been cleaned or replaced,
– no hairs, threads, or similar things are wrapped around the wheels.
2. If necessary, just wipe down the housing with a damp cloth.
3. Pull the dust cloth off the dust cloth holder and wash it using warm water and mild
soap.
4. Remove the dust container:
– press the release buttons (2) on the device at the same time,
– pull out the dust container.
5. Open the dust container by fl ipping the locking lug forwards and pushing it up.
6. Empty the dust container over a rubbish bin.
7. Also clean the dust fi lter over a rubbish bin after each use. This is located inside the
dust container.
09860_DE-EN-FR-NL_A5_V4.indb 20
09860_DE-EN-FR-NL_A5_V4.indb 20
20
11.04.2016 14:09:38
11.04.2016 14:09:38
Advertenties
Hoofdstukken
Inhoudsopgave
