EN
Basic Functions
•
This robot vacuum cleaner sucks up loose dirt through the nozzle. To clean more
effi ciently, it has a fl oor cloth.
•
Thanks to its sensors, the device can recognise a wall or other obstacles and change
its direction of travel.
•
The sensors on the bottom of the device recognise steps or other depressions so that
the device cannot fall down.
Before Initial Use
Before you can use the device, you must:
•
unpack the items supplied and remove all transport and packaging elements,
•
insert and charge up the rechargeable battery of the device.
Unpacking the Items Supplied
CAUTION!
■
Do not leave the mains adapter connected for a prolonged period of time. Disconnect
it from the mains once charging is
■
Keep the mains adapter, the cable and the device away from radiators or other heat
sources as well as from direct sunlight.
■
Keep children and animals away from the packaging material. There is a danger of
suffocation!
•
Unpack all parts and check the items supplied to make sure they are complete
(see the "Items Supplied" chapter); also check for transport damage. If you fi nd any
damage to the components, do not use them (!), but contact the customer service
department.
•
Remove all possible transport restraints and protective fi lms.
Removing / Inserting Battery
CAUTION!
■
The device must not be connected to the mains power while the battery is being
removed / inserted.
■
You should never open the battery pack!
To insert or remove the rechargeable battery, please proceed as follows:
09860_DE-EN-FR-NL_A5_V4.indb 18
09860_DE-EN-FR-NL_A5_V4.indb 18
18
complete.
•
Undo the screw, reach into the indentation and fl ip up the
battery compartment cover.
•
Inserting: Attach the connectors and insert the battery
pack into the battery compartment. Close the battery com-
partment cover and tighten the two screws.
•
Removing: Pull up the battery pack and release the plug
connection by pressing on the locking lug.
11.04.2016 14:09:38
11.04.2016 14:09:38