Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
en Installation instructions
Restore the control panel cabling and the cabling
5.
for the lighting.
The plug can only be inserted into one position.
Fit the grease filters.
6.
To avoid causing damage, do not bend the grease
filters.
Attach and close the filter cover.
7.
Establishing the exhaust air connection
1.
Secure the exhaust pipe to the air pipe connector.
Establish the connection to the exhaust air opening.
2.
Seal the joints.
3.
Establishing the circulating-air connection
(circulating-air module)
Requirement: The supplement for the circulating-air
module is available and is complied with.
1.
Secure the exhaust pipe to the air pipe connector.
Establish the connection to the opening on the cir-
2.
culating-air module.
Seal the joints.
3.
4.
Insert the odour filter.
Connecting to the power supply
Insert the mains plug into the protective contact
1.
socket.
30
All manuals and user guides at all-guides.com
If a fixed connection is required, follow the instruc-
2.
tions in the section
→ "Instructions for the electrical connection",
Page 27.
Removing the appliance
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
Wear protective gloves.
▶
Disconnect the appliance from the power supply.
1.
Loosen the exhaust pipe.
2.
Open the filter cover if required.
3.
Remove the grease filters.
4.
To avoid causing damage, do not bend the grease
filters.
Remove the frame.
5.
Undo the control panel cabling and cabling for the
6.
lighting.
Loosen the screw connection with the fitted unit.
7.
Slowly take the appliance down.
8.
Advertenties
Hoofdstukken
Inhoudsopgave
