Download Inhoudsopgave Inhoud Print deze pagina

General Information; Instructions For The Electrical Connection - Gaggenau AC2001.1 Gebruikershandleiding En Installatie-Instructies

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

WARNING ‒ Risk of injury!
Components inside the appliance may have
sharp edges.
▶ Wear protective gloves.
The appliance may fall down if it has not been
properly fastened in place.
▶ All fastening components must be fixed
firmly and securely in place.
Changes to the electrical or mechanical as-
sembly are dangerous and may lead to mal-
functions.
▶ Do not make any changes to the electrical
or mechanical assembly.
The filter cover may swing out.
▶ Open the filter cover slowly.
▶ Take hold of the filter cover after opening
until it no longer swings out.
▶ Close the filter cover slowly.
WARNING ‒ Risk of electric shock!
Sharp-edged components inside the appli-
ance may damage the connecting cable.
▶ Do not kink or trap the connecting cable.
If the appliance or the power cord is dam-
aged, this is dangerous.
▶ Never operate a damaged appliance.
▶ Call Customer Service. → Page 25
▶ Repairs to the appliance should only be
carried out by trained specialist staff.
Incorrect repairs are dangerous.
▶ Repairs to the appliance should only be
carried out by trained specialist staff.
▶ Only use genuine spare parts when repair-
ing the appliance.
▶ If the power cord of this appliance is dam-
aged, it must be replaced by trained spe-
cialist staff.
Improper installation is dangerous.
▶ Connect and operate the appliance only in
accordance with the specifications on the
rating plate.
▶ Connect the appliance to a power supply
with alternating current only via a properly
installed socket with earthing.
▶ The protective conductor system of the do-
mestic electrical installation must be prop-
erly installed.
▶ Never equip the appliance with an external
switching device, e.g. a timer or remote
control.
All manuals and user guides at all-guides.com
▶ When the appliance is installed, the mains
▶ When installing the appliance, check that
12.5 General information
Follow these general instructions during the installation.
¡ For the installation, observe the currently valid buil-
¡ When discharging the exhaust air, the official and le-
¡ The width of the extractor hood must correspond at
¡ To optimally detect the cooking vapours, install the
¡ In order to freely access the appliance for servicing,
¡ The surfaces of the appliance are sensitive. Avoid
12.6 Instructions for the electrical
connection
In order to safely connect the appliance to the elec-
trical system, follow these instructions.
It must always be possible to disconnect the appliance
from the electricity supply. The appliance must only be
connected to a protective contact socket that has been
correctly installed.
Sharp-edged components inside the appliance may
damage the connecting cable.
¡ The connection data can be found on the rating pla-
¡ The connecting cable is approx. 1.30 m long.
¡ This appliance complies with the EC interference
¡ The appliance corresponds to protection class 1.
plug of the power cord must be freely ac-
cessible. If free access is not possible, an
all-pole isolating switch must be installed in
the permanent electrical installation accord-
ing to the conditions of Overvoltage Cat-
egory III and according to the installation
regulations.
the power cable is not trapped or dam-
aged.
ding regulations and the regulations of the local
electricity and gas suppliers.
gal regulations, such as the regional building code.,
must be observed.
least with the width of the hob.
appliance in the middle of the hob.
select an easy-to-reach installation site.
damaging them during installation.
WARNING ‒ Risk of electric shock!
The mains plug for the mains power cable must be
easily accessible after the appliance is installed.
If this is not possible, an all-pole isolating switch
must be integrated into the permanent electrical in-
stallation according to the conditions of overvoltage
category III and according to the installation regula-
tions.
The permanent electrical installation must only be
wired by a professional electrician. We recommend
installing a residual-current circuit breaker (RCCB)
in the appliance's power supply circuit.
Do not kink or trap the connecting cable.
te. → Seite 25
suppression regulations.
You should therefore only use the appliance with a
protective earth connection.
Installation instructions en
27

Advertenties

Inhoudsopgave
loading

Inhoudsopgave