Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
● Place the tanks of the products to be dosed below the pumps without
exceeding the maximum suction height of the pumps (about 1.5 m).
● If the system is installed below the level of the liquid to be dosed, check the
condition of the injection valves or install an appropriate anti-siphon kit.
● If the pump is placed above the tank and the reagent fumes could be
especially aggressive, check the tank seals.
Connect the connectors that may be disconnected for packaging reasons to the
respective inputs on the bottom of the unit (see the "Functional description" section
for further details).
Technical Data
● pH and ORP Inputs: Available on BNC connectors, input impedance > 10^12 Ω
● Ranges: 0.00 to 14.00 pH, 0 to 1000 mV (ORP)
● Precision: Better than 1% of the full scale
● Repeatability: Better than 0.2% of the full scale
● Configuration: Two configuration levels (standard and advanced)
● Digital Inputs: 2 independent inputs for level sensors available on connectors
accept SPDT contact 5 V / 5 mA; 1 input for flow sensor or OFF contact
accept SPDT contact 5 V / 5 mA
● Display: Large alphanumeric double row (x 16 characters) LCD with backlight
● Peristaltic Pumps:
● Flow rate: 1.5 l/h @ 1 bar for pH adjustment (acid dosage), 6 l/h @ 1
bar for chlorine dosage
● Materials: Fiberglass reinforced PP pump head and fittings, Santoprene
internal tube, PBT roller holder with Delrin (self-lubricant) rollers
● Max suction height: 1.5 m
● Power Supply: 230 V~ ±10% 50 Hz, max 80 VA
● Protection Fuse: F1A 5x20 (@ 230V~)
● Environment:
● Storage temperature: -20 ... +60 °C
● Working temperature: -10 ... +40 °C
● RH: max 90% non-condensing
● Casing: Self-extinguishing plastic material with polyester front panel
● Installation: Wall installation with supplied screws and stoppers
● Protection Rate: IP65
● Dimensions: 290 x 280 x 175 mm
● Weight: Approx. 4 kg
Advertenties
Hoofdstukken
Inhoudsopgave
