Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Problem
The dishes are wet and dull.
How to activate the rinse aid dispenser
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons B and C.
– The indicator lights for function buttons A, B, and C start to flash.
4. Release function buttons B and C.
5. Press function button B.
– The indicator lights for function buttons A and C go off.
– The indicator light for function button B continues to flash.
– The display shows the current set.
6. Press function button B again.
– The display shows the new adjustment.
7. Switch off the appliance to keep the operation.
TECHNICAL DATA
Dimensions
Water supply pressure
1)
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
The rating plate on the inner edge of the appliance door shows the electrical connection
data.
If the hot water comes from alternative sources of energy, (e.g. solar panels, photovoltaic
panels and aeolian), use a hot water supply to decrease energy consumption.
All manuals and user guides at all-guides.com
Possible cause
The rinse aid dispenser is emp-
ty.
The multitab function is on.
(The rinse aid dispenser is au-
tomatically off).
Width
Height
Depth
Minimum
Maximum
Cold water or hot water
Place settings
Fill the rinse aid dispenser with
rinse aid.
Activate the rinse aid dispens-
er. Refer to 'How to activate
the rinse aid dispenser'.
Rinse aid dispenser deactivated
Rinse aid dispenser activated
Technical data
63
Possible solution
596 mm
818 - 898 mm
550 mm
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
maximum 60 °C
12
Advertenties
Hoofdstukken
Inhoudsopgave
