Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Fault
Cool-fresh compartment is
too warm or cold.
Noise
Fault
Appliance has a humming
sound.
The appliance bubbles,
buzzes or gargles.
The appliance clicks.
Appliance crackles.
The appliance makes
noises.
Cause
Standard setting is too high
or too low, e.g. frost in cool-
fresh compartment.
Cause
Not a fault. A motor is run-
ning, e.g. refrigerating unit,
fan.
Not a fault. Refrigerant flows
through the pipes.
Not a fault. Motor, switches
or solenoid valves are
switching on or off.
Not a fault. Automatic de-
frosting is running.
The appliance is not level.
Fittings wobble or stick.
Bottles or containers are
touching.
Super freezing is switched
on.
Troubleshooting en
troubleshooting
Note: The standard setting of the cool-
fresh compartment is preset at 0. Set-
ting 0 corresponds to a temperature of
around 0 °C. You can set the temperat-
ure in the cool-fresh compartment to
3 settings warmer or colder.
A change in the standard setting will
affect the temperature in the refriger-
ator compartment and the freezer
compartment.
Press
until the temperature
1.
display (refrigerator compartment)
flashes.
To change the setting, press / .
2.
– Setting –3 corresponds to the
coldest setting.
– Setting +3 corresponds to the
warmest setting.
a The selected setting is saved after
one minute.
troubleshooting
No action required.
No action required.
No action required.
No action required.
Align the appliance using a spirit
▶
level. If required, place something
underneath it.
Check the removable fittings and, if
▶
required, replace these.
Move the bottles or containers
▶
away from each other.
No action required.
35
Advertenties
Hoofdstukken
Inhoudsopgave
