Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Tips for saving energy
Install the appliance in a dry, well
■
ventilated room! The appliance should
not be installed in direct sunlight
or near a heat source (e.g. radiator,
cooker).
If required, use an insulating plate.
Select 560 mm cavity depth.
■
A smaller cavity depth will result in
a higher energy consumption.
Allow warm food and drinks to cool
■
down before placing in the appliance.
Thaw frozen food in the refrigerator
■
compartment and use the low
temperature of the frozen food to cool
refrigerated food.
Open the appliance as briefly as
■
possible.
Regularly defrost the freezer
■
compartment to remove the layer
of frost.
A layer of hoarfrost will impair
refrigeration of the frozen food
and increase power consumption.
Ensure that the freezer compartment
■
door is always closed properly.
To avoid increased power
■
consumption, occasionally clean the
back of the appliance.
The arrangement of the fittings does
■
not affect the energy rating of the
appliance.
Operating noises
Quite normal noises
Droning
Motors are running (e.g. refrigerating
units, fan).
Bubbling, humming or gurgling noises
Refrigerant is flowing through the tubing.
Clicking
Motor, switches or solenoid valves are
switching on/off.
Preventing noises
The appliance is not level
Please align the installation cavity with
a spirit level. To do this, use the height-
adjustable feet of the cavity or place
something underneath.
Containers or storage areas wobble
or stick
Please check the removable parts
and re-insert them correctly if required.
Receptacles are touching each other
Move the receptacles slightly away from
each other.
en
31
Advertenties
Inhoudsopgave
