Download Inhoudsopgave Inhoud Print deze pagina

Tronic TPB 10000 A1 Gebruiksaanwijzing En Veiligheidsinstructies pagina 16

10,000mah
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

is charged at the Type C port, the fourth LED of the battery
capacity indicator lights up green.
In case if the charging process does not begin immediately,
press the ON / OFF button
process. The current battery status of the power bank
displayed during the charging process by the LED indicator
for battery capacity
To end the charging process, disconnect the USB charging
cable from the mobile device and the power bank
power bank will switch OFF after approx. 30 seconds.
Or simply double click with ON / OFF button
power bank and the LED indicator for battery capacity
will switch off.
NOTE:
1. If you use all the USB ports, a voltage of 5 V will output at
the outputs. The maximum output current must not exceed
3.0 A for all outputs. If all USB outputs are used, fast charge
is not possible.
2. If USB type A output
or PD mode, and another USB port is connected to another
device for charging, the quick charge mode or PD mode
will be terminated and switched to normal charge mode. All
devices will now be charged at 5 V each.
GB/IE/NI 16
briefly to begin the charging
6
.
7
or PD port
2
. The
6
is in quick charge
1
is
3
3
. The
7

Advertenties

Inhoudsopgave
loading

Gerelateerde Producten voor Tronic TPB 10000 A1

Deze handleiding is ook geschikt voor:

398117 2107

Inhoudsopgave