Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Remote control
The remote control has a pre-installed lithium CR2025 battery.
Remove the protective tab to activate the remote control battery.
Inserting / replacing the remote control battery:
1) Push the security lock.
2) Pull out the battery tray and remove the old battery.
3) Place a new CR2025 battery into the battery tray with correct polarity (+/-) as indicated.
4) Place battery tray back in the slot.
A
B
C
Power ON/OFF
Connect the device to an easily accessible power socket. When connected, a beep sounds.
Press the POWER button on the device
While pressing, a twin beep sounds.
When switching on the device it automatically starts in normal airflow and low FAN speed.
To switch off the device, press the POWER button on the device
again. A beep sounds and the LED indicator switches off.
To switch off the device completely, remove the power plug from the power socket.
FAN speed
When the device is powered on, it automatically starts in normal airflow and low FAN
speed.
Repeatedly press the fan SPEED button on the device
required FAN speed has been selected. There are 3 selectable FAN speeds; low, medium
& high speed.
While pressing, a beep sounds and the selected FAN speed is indicated on the LED
indicator.
FAN airflow
The device has 3 selectable mode functions: normal – natural - sleep.
Press the MODE button on the device
D
REMOTE CONTROL:
Power ON/OFF
E
A
B
FAN speed
Timer
C
Oscillation
D
Airflow mode
E
or remote control
1
or remote control
3
EN 06
to switch on the device.
A
or remote control
1
or remote control
4
to select the desired mode.
E
A
until the
B
Advertenties
Inhoudsopgave
