Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3.
Remove the old batteries.
4.
Insert the new batteries into the battery compartment recess.
5.
Slide the battery cover back into the remote control.
6.
Faults and solutions
PROBLEM
The appliance does not
start when the on/off
button is pressed.
The appliance stops
automatically.
54
FUAVE TF105DB | TF105DW
CAUSE
The appliance is not
powered.
The battery in the remote
control is empty.
The remote control is
outside the range of the
appliance (five metres).
A fuse has blown in the
meter cabinet.
The appliance is
automatically disabled by
the timer setting.
SOLUTION
Check that the plug is
in the socket and that
the cable or plug is not
damaged.
Check that the RCD is
switched on.
Check that there is no
power failure.
Replace the battery of
the remote control. See
section 5.5.Replacing
the battery in the
remote control for more
information.
Keep the remote control
within five meters of the
appliance.
1.
Remove the
appliance's plug
from the socket.
2.
Check the fuses in
the meter box.
If the problem persists,
contact Customer Service.
Press the on/off button
to switch the appliance
back on.
Advertenties
Hoofdstukken
Inhoudsopgave
