washing cycle. It is recommended for your cotton
items (such as bed sheets, duvet and pillowcase
sets, bathrobes, underclothing, etc.).
•Synthetics
You can wash your less durable clothes on
this program. Gentler washing movements and
a shorter washing cycle is used compared to
the "Cottons" program. It is recommended for
your synthetic clothes (such as shirts, blouses,
synthetic/cotton blended garments, etc.). For
curtains and lace, the "Synthetic 40" program with
pre-wash and anti-creasing functions selected is
recommended. Detergent should not be put in the
pre-wash compartment. Less detergent should be
put in the main wash compartment as loose knit
fabrics (lace) foam too much due to its meshed
structure.
•Woolens
You can wash your machine-washable woolen
garments on this program. Wash by selecting the
proper temperature according to the labels of your
clothes. It is recommended to use appropriate
detergents for woolens.
Additional programs
There are additional programs for special cases.
Each of these additional programs comprise of
a complete washing process, including washing,
rinsing and, if required, spin cycles.
• Delicates
You can wash your delicate clothes on this
program. It has more sensitive washing
movements and does not make intermediate
spinning compared to "Synthetic" program. It
must be used for clothes for which sensitive
washing is recommended.
• Mix
You can use this program to wash cottons and
synthetics together. There is no need to sort
them.
• Hand Wash
You can wash your woolen/delicate clothes that
bear "not machine- washable" labels for which
hand wash is recommended on this program.
It washes the laundry with very tender washing
movements without damaging your clothes.
• Xpress 30˚ Super Short
Suitable for slightly soiled and little amounts of
laundry. E.g.: Laundry without stain and put on
just for once and etc. It may be used for rinsing
purposes. It performs washing at 30°C. Never use
for stained laundry. Do not place more laundry
than recommended (2 kg).
• Xpress 30˚ 30 min
Suitable for slightly soiled and more amounts
of laundry. It performs washing at 30°C. Never
use for stained laundry. You can wash up to the
maximum loading capacity (7 kg). E.g.: Bathrobe
that was put on just for once, duvet cover, sport
wears, daily clothes and etc.
• Xpress 60˚ 58 min
Suitable for laundry that are not heavily soiled but
you want to wash at high temperature and in a
short time. You can wash up to the maximum
loading capacity (7 kg). E.g.: underwear that is
suitable for high temperature, baby garments and
etc.
• Program of 88 mins.
In order to activate this program, cotton 90°C
program and express auxiliary function should be
selected together.
Suitable for laundry that are not heavily soiled
but you want to wash at a very high water
temperature and in a short time. You can wash
up to the maximum loading capacity (7 kg). E.g.:
underwear that is suitable for high temperature,
baby garments and etc.
Special programs
For specific applications, you can select any of the
following programs:
• Rinse
This program is used when you want to rinse or
starch separately.
• Spin
This program spins with maximum possible rpm in
the default setting.
C
You should use a lower spin speed for
delicate laundries.
• Pump
This program is used to discharge the water of
the clothes soaked into water in the machine.
Spin Speed selection
Whenever a new program is selected, the
maximum spin speed of the selected program is
displayed on the spin speed indicator.
To change the spin speed, press the "Spin"
button. Spin speed decreases gradually. Then,
rinse hold and no spin options can be selected
respectively.
If you do not want to unload your clothes
immediately after the program, you may use rinse
hold function in order to prevent your clothes
become wrinkled in anhydrous conditions. With
this function, your laundry is kept in the final
rinsing water. If you want to spin your laundry that
you left in water:
- Adjust the spin speed.
- Press "Start/Pause/Cancel" button.
Program resumes. Your machine drains the water
and spins your laundry.
You can use no spin function in order to drain the
water without spinning at the end of the program.
42 - EN