Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
DO426BL
Disassembly and assembly
1.
Turn the speed control dial to the '0' position.
2.
Remove the glass jug from the motor case.
3.
Remove the measuring cup from the lid and then
remove the lid.
4.
Place the glass jug on the motor case and turn the jug
until it is positioned securely.
5.
Place the lid on the glass jug and place the measuring
cup in the lid.
Use
Place the food to be mixed in the glass jug.
Place the lid on the glass jug and place the glass jug on the motor case. Place the
measuring cup in the lid.
Turn the speed control dial to the '1' or '2' position.
'1' is for light liquids and '2' for thicker liquids and solid foods.
With the 'Pulse' position you can blend with short, controlled pulses. Turn the dial to
the 'Pulse' position and hold down the button. Release the button to proceed to the '0'
position.
Knife assembly
Removal of the knives
REMOVE THE KNIVES ONLY WHEN ABSOLUTELY NECESSARY!
Remove the knives from the jug by turning the bottom part of the jug (threaded ring)
in a counterclockwise direction.
Place the whole on a flat surface to facilitate the removal. Place a thick cloth over the
knives and pull them out straight.
The knives are very sharp. Be extremely careful when you touch them.
To replace the knives
When you place the threaded ring and the knives on the jug, ensure that the level sides
of the knives are placed equally with the level sides of the opening of the jug. Turn the
white threaded ring clockwise onto the jug until secure.
IMPORTANT: if the knives are not installed correctly, the appliance will produce
more noise.
24
www.domo-elektro.be
Advertenties
Inhoudsopgave
