Paul Hochköpper GmbH & Co. KG • Postfach 1727 • D-58467 Lüdenscheid • Tel.: (02351)185-0 • Fax: (02351)27666 • e-mail: peha@peha.de • Internet: www.peha.de
10. Potentiometer functions
1
Setting brightness
clockwise limit = maximum brightness
counter clockwise limit = minimum brightness
2
LED function settings
Caution!! LED functions are not selectable for
every function option of the single switch control!
a) Counter clockwise limit
The LED is switched off permanently.
b) Mid-point setting
The LED is switched on when the light is illuminated
(control light).
c) Clockwise limit
The LED is switched on permanently.
3
Short-term time setting
counter clockwise limit = 2 s
(impulse button)
clockwise limit = 60 min
(maximum time)
4
Long-term time setting
counter clockwise limit = 30 min
(minimum)
30 Min
clockwise limit = 10 h
(maximum time)
5
Time setting for remote station switching duration
counter clockwise limit = 1 min
(minimum)
1 Min
clockwise limit = 60 min
(maximum time)
11. Functions for the PEHA single-switch
and Easywave wireless attachment
11.1 Function selector switch - position 1
"Tactile dimmer memory"
If the dimmer was switched off, the dimming process will
begin with minimum brightness. The dimming process will
stop at minimum or maximum brightness.
Tactile attachment,
Function
remote station
Press button briefly
Switch on/off to
then release it
memory value
Press button for longer
Dim consumer up or down
Press button for longer
Dimming stops, dimming
then release it
setting stored in memory
Function pot. (s. Point 10)
Potentiometer function 2
11.2 Function selector switch - position 2
"Tactile dimmer memory with adjustable brightness"
If the dimmer was switched off, the dimming process will
begin with minimum brightness.The dimming process will
stop at minimum or maximum brightness. Minimum brightness
is the preset basic brightness value.
Tactile attachment,
Function
remote station
Press button briefly
Switch on/off to
then release it
memory value
Press button for longer
Dim consumer up or down
Press button for longer
Dimming stops, dimming
then release it
setting stored in memory
Function pot. (s. Point 10)
Potentiometer function 1
Function LED (attachment)
Control light
492AN-Rev06_061109.pdf
11.3 Function selector switch - position 3
"Tactile dimmer without memory"
If the dimmer was switched off, the dimming process will
begin with minimum brightness. The dimming process will
stop at minimum or maximum brightness.
Tactile attachment,
remote station
Press button briefly
then release it
Press button for longer
Press button for longer
then release it
Function pot. (s. Point 10)
11.4 Function selector switch - position 4
"Tactile switch"
Tactile attachment,
remote station
15s
60s
Press button briefly/release
2s
15 Min
Function pot. (s. Point 10)
60 Min
Function LED (attachment)
Short-term
Kurzzeit
11.5 Function selector switch - position 5
"Stairwell switch"
45 Min
90 Min
Tactile attachment,
6 h
remote station
10 h
Press button briefly/release Switch on for the preset
Long-term
Langzeit
Function pot. (s. Point 10)
Function LED (attachment)
2 Min
4 Min
20 Min
60 Min
11.6 Function selector switch - position 6
"Time switch, short-term"
Tactile attachment,
remote station
Press button briefly/release
Function pot. (s. Point 10)
Function LED (attachment) Orientation light! Prema-
11.7 Function selector switch - position 7
"Time switch, long-term"
Tactile attachment,
remote station
Press button briefly/release
Function pot. (s. Point 10)
Function LED (attachment) Orientation light! Prema-
126112-02
Function
Switch on/off with
maximum brightness
Dim consumer up or down
Dimming stops
Potentiometer function 2
Function
Switch on/off!
Potentiometer function 1
Control light
Function
period or to restart period!
Potentiometer function 3
Orientation light!
No premature switch-
off possible!
Function
Switch on for the preset
period or to switch off!
Potentiometer function 3
ture switch-off possible!
Function
Switch on for the preset
period or to switch off!
Potentiometer function 4
ture switch-off possible!
11.8 Function selector switch - position 8
"Time switch, programmable"
Tactile attachment,
Function
remote station
Press button briefly/release
Switch on for the preset
period or to switch off!
Function pot. (s. Point 10)
Potentiometer function 1
Function LED (attachment) Orientation light! Prema-
ture switch-off possible!
Programming a new switching period:
a) The light is off
After pressing the button for about 3 s the light will switch on
with slow dimming speed; the new time period to be programmed
begins to accumulate. For switches with an LED, the LED will
begin to blink.
b) The light is on
After pressing the button for about 3 s the light will switch off
with slow dimming speed; and the expired time will be stored.
For switches with an LED, the LED will cease to blink.
Maximum programmable time.................................17 hours
0 to 2 minutes...........................................exact to the second
2 minutes to 2 hours.................................exact to the minute
2 hours to 17 hours......................................exact to the hour
12. PEHA double-switch
functions
12.1 Function selector switch - position 1
"Tactile dimmer memory"
If the dimmer was switched off, the dimming process will
begin with minimum brightness. The dimming process will
stop at minimum or maximum brightness.
Remote station
Function
Press button briefly
Switch on/off to
then release it
memory value
Press button for longer
Dim consumer up or down
Press button for longer
Dimming stops, dimming
then release it
setting stored in memory
Tactile attachment
Function
Press button briefly
Switch on/off to
then release it
memory value
Press left button for longer Dim consumer down
Press right button for longer Dim consumer up
Press button for longer
Dimming stops, dimming
then release it
setting stored in memory
Function pot. (s. Point 10)
Potentiometer function 1
12.2 Function selector switch - position 2
"Tactile dimmer without memory"
If the dimmer was switched off, the dimming process will
begin with minimum brightness. The dimming process will
stop at minimum or maximum brightness.
Remote station
Function
Press button briefly
Switch on/off with maximum
then release it
brightness
Press button for longer
Dim consumer up or down
Press button for longer
Dimming stops
then release it
Tactile attachment
Function
Press button briefly
Switch on/off with maximum
then release it
brightness
Press left button for longer Dim consumer down
Press right button for longer Dim consumer up
Press button for longer
Dimming stops
then release it
Function pot. (s. Point 10)
Potentiometer function 1
Elektronik
Elektronik
Elektronik
Elektronik
Elektronik
GB - 2