Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8.2 Orientation
■
This mark is shown inside the casing.
■
It indicates the correct orientation for installation.
8.3 Diagram
9 Sensor settings
Symbol
Type
Detection distance
Activation duration
Light sensor
10 Cleaning
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They dam-
age the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Switch the product off.
2. Let the product cool down to ambient temperature.
3. Clean the product with a dry, fibre-free cloth.
11 Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU
market. This symbol indicates that this device should not be disposed of as unsorted muni-
cipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it sep-
arately from unsorted municipal waste. Spent batteries and accumulators, which are not
enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-de-
structive manner, must be removed by end users from the WEEE in a non-destructive
manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of
waste. Conrad provides the following return options free of charge (more details on our website):
■
in our Conrad offices
■
at the Conrad collection points
■
at the collection points of public waste management authorities or the collection points set up by
manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in coun-
tries outside of Germany.
12 Technical data
Input voltage ......................................... 220 - 240 V/AC
4
Description
■
Adjust the sensor detection distance.
■
Maximum 8 meters.
■
Adjust how long the light stays on after motion is detec-
ted.
■
Duration: 10 seconds to 4 minutes
Adjust the behavior of the light:
■
(-) : Always ON.
■
(+): ON at night, OFF during the day.
NOTE: Nearby lights (e.g., streetlights) can prevent the light
from activating at night.
Input AC frequency ............................... 50 Hz
Material.................................................. Housing: Aluminium
Spotlight................................................. 2x GU10, max. 2x 35 W
Ingress protection.................................. IP44
Motion sensor........................................ Type: Passive infrared (PIR)
Light activation threshold....................... 60 lux
Operating temperature ......................... -20 to +40 °C
Storage temperature ............................. -20 to +40 °C
Dimensions (W x H x D) (approx.) ........ 68 x 215 x 110 mm
Weight (approx.) ................................... 510 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*3014220_V3_0724_dh_mh_en 27021598982476683-2 I4/O3 en
Diffuser: Tempered glass
Mounting height: approx. 2 m
Detection distance: 5 - 8 m
Detection angle: 110°
Activation time: 10 s to 4 mins
Advertenties
Inhoudsopgave
