Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operating Instructions
Outdoor Light with Sensor
Item no: 3014220
1 Operating Instructions for download
Use the link
www.conrad.com/downloads
operating instructions (or new/current versions if available). Follow the instructions on the web page.
2 Intended use
The product is an outdoor light fixture with integrated motion and light sensor.
The fixture has 2x GU10 LED light sockets for simultaneous up and down lighting.
The product can function with only 1x GU10 LED light installed.
Important:
The product has an IP44 ingress protection rating. It is splash proof and suitable for outdoor use.
Do not submerge in water.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
3 Delivery contents
■
Product
■
2x screws and dowels
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by electric shock.
Read the operating instructions carefully.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing ma-
terial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an authorised
repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the
product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and
solvents.
5.4 Operation
■
The product must be installed by a qualified professional.
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from
any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer
be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 LED light
■
Do not look directly into the LED light!
■
Do not look into the beam directly or with optical instruments!
5.6 Electrical installation
WARNING! Safety hazard!
The product should only be installed by people with relevant electrical knowledge and experience! *)
If it is not installed properly, you risk:
■
your own life
■
the life of user of the electrical device
3
(alternatively scan the QR code) to download the complete
■
Operating instructions
■
severe damage to property, e.g., by fire
■
personal liability for personal injury and material damage
Always consult an electrician!
*) Technical knowledge required to perform the installation:
For the installation, the following specialist knowledge is required in particular:
■
The "Five safety rules": Disconnect from the mains; protect against accidental switch-on; ensure
there is no voltage; earth and short-circuit; cover or protect adjacent live parts
■
Use of suitable tools, measuring devices and personal protective equipment, where necessary
■
Analysis of measurement results
■
Use of electrical installation materials to meet the requirements for disconnection
■
IP protection ratings
■
Installation of electrical installation materials
■
Type of power supply (TN system, IT system, TT system) and the corresponding connection cri-
teria (classic earthing, protective earthing, necessary additional measures etc.)
If you are not a professional, do not do it yourself, have it performed by a specialist.
5.7 Drilling
When penetrating the surface (example: drilling or inserting fasteners), make sure no
cables or pipes are damaged. Inadvertently penetrating electric cables causes the life-
threatening danger of an electric shock! Check for concealed wires and pipes before
drilling or inserting fasteners.
5.8 Luminaire
■
Do not hang or fasten anything on the product (e.g. decorations).
■
Do not cover the product – provide free air circulation.
■
This luminaire may only be operated with a complete and intact protection glass.
■
In case of a malfunction you may NOT touch the product or operate it further. Disconnect the
product from the power supply by an external switch or by the fuse.
■
A malfunction exists when:
– There is visible damage.
– The product does not operate correctly (e.g. flickering).
– Smoke, steam, or crackling sounds appear.
– Overheating is apparent (e.g. discolouration of adjacent surfaces).
6 Motion detection
The product is equipped with a motion sensor that activates when movement is detected.
For best motion detection:
■
The subject should move across the sensor.
■
The sensor should not be placed behind glass.
- Suggested mounting height: 2 m
- Detection range: max. 8 m
- Detection angle: 180°
7 Motion sensor (PIR)
The passive infrared (PIR) motion sensor reacts to changes in temperature, e.g. when a person or an-
imal enters the detection area.
■
Position the sensor so the object moves across the detection area.
■
The correct installation height should be observed.
■
Do not point the sensor at radiators, lights, or objects with varying temperatures (e.g. electronic
equipment), and objects that may move due to the flow of air. This may trigger the sensor uninten-
tionally.
■
Do not install the product behind glass.
■
Keep the sensor away from direct sunlight.
8 Installation
Important:
Only install the product on a stable surface, e.g. masonry. Depending on the substrate, suitable
screws and, if necessary, dowels must be used.
8.1 Wiring
Requirements
The mains supply to which you will wire the product must meet the following conditions:
■
The mains supply includes a light switch. The light switch will be used to switch the product on and
off.
■
The mains supply is protected by an RCD protective switch.
Wiring
Observe the following wire colour coding:
- Blue: Neutral (N)
- Brown: Single phase (L)
- Green-yellow: Protective earth (PE
)
y(°)
Advertenties
Inhoudsopgave
