Download Inhoudsopgave Inhoud Print deze pagina
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

TROUBLESHOOTING

Before calling for repair, please review the list below, since the problem may not be a unit malfunction .
SYMPTOM
Odours and smoke are not
removed.
The CLEAN-SIGN Light lights
green even when the air is im-
pure.
The CLEAN-SIGN Light lights
orange or red even when the
air is clean.
A clicking or ticking sound is
heard from the unit.
The discharged air has an aro-
ma or odour.
The unit does not operate when
cigarette smoke is in the air.
The Plasmacluster Indicator
Light or the CLEAN-SIGN Light
will not activate.
ERROR DISPLAY
LAMP INDICATION
The "SILENT" Fan Speed Indi-
cator Light blinks.
All manuals and user guides at all-guides.com
• Clean or replace the filters if they appear to be heavily soiled.
(Refer to E-11,E-12)
• The air could be impure at the time the unit was plugged in. (Refer
to E-5) Pull out the plug from the electrical outlet, and insert the
plug one minute later.
• The sensitivity of the sensor become unstable when the open-
ing of the odour sensor is dirty or is clogged.
Clean the dust around the sensor opening using a vacuum
cleaner. (Refer to E-10)
• Clicking or ticking sounds may be audible when the unit is gen-
erating ions.
• Check to see if the filters are heavily soiled.
Replace the filters.
• Plasmacluster Air Purifiers emit small traces of ozone which
may produce an odour. These ozone emissions are well below
safety levels.
• Is the unit installed in a location that is difficult for the sensor to
detect cigarette smoke?
• Is the odour sensor opening blocked or clogged?
(In this case, clean the opening.) (Refer to E-10)
• Check to see if the Lights OFF Mode is selected. If so, then
press the Plasmacluster ON/OFF Button for 3 seconds to acti-
vate the indicator lights.
(Refer to E-9)
Fan motor is disconnected or abnormal.
Operation stops.
• Pressing the POWER ON/OFF button will reset the error dis-
play, but if error occurs again, contact the shop where you
purchased the unit.
E-13
REMEDY (not a malfunction)
REMEDY

Advertenties

Inhoudsopgave
loading

Inhoudsopgave