Advertenties
GB
General
General instructions
Read these instructions carefully prior to installation and use. Save
this manual for reference purposes.
The product may only be used as described in the technical manual.
The warranty applies only if the product is used in the intended
manner and in accordance with the instructions.
The manufacturer continuously strives to improve products and
reserves the right to make changes to specifications without prior
notice. The technical details are assumed to be correct but do not
form a basis for a contract or guarantee. All orders are accepted under
the standard conditions of our general sales and delivery conditions
(available on request).
Intended use
Tanner MBA is a waterfed hanging air heater for ventilation and air-
conditioning in:
• Office spaces
• Meeting and exhibition areas
• Recreational areas
• Industrial and manufacturing buildings
• Greenhouses
• Shops, supermarkets, shopping areas
with a ceiling height of about 2,5 to 5 meter.
Transport of air that is:
• Dust free
• Without harmful substances
• Non-agressive
• Non-corrosive
• Not flammable
Consultation with or consent of the manufacturer is necessary for
differents type of use.
Tanner MBA devices that are used for transporting flammable or
explosive gasses, vapors, mists or dusts must be specifically designed.
Standard Tanner MBA devices may not be used in hazardous areas
without appropriate adjustments to the technical specifications.
4
Note:
The Tanner MBA device may only be maintained when:
• The isolation switch is connected (isolation switch optional);
• There is no power connection;
• Electrically operated and/or rotating parts are protected against
restarting (isolation switch);
• The rotating part has stopped;
• The components have been cooled down to room temperature.
Note:
Only qualified personnel should perform maintenance on the electrical
components. Consider the local regulations! Changes or additions
to the device invalidate the declaration of conformity from the
manufacturer.
Transport packaging
The transport packaging has been quantitatively reduced to the
absolute minimum to transport the quality parts without damage. The
material is fully recyclable. The disposal costs are for the recipient of
the goods. It is also possible to return the packaging material. The
costs for transport of these are for the recipient of the goods. Please
note that the packaging may not be contaminated and must be
seperated into groups.
Subject to change
The manufacturer is committed to constantly improving its products
and reserves the right to make changes in the specifications without
prior notice. The technical details are considered correct but do not
form the basis for a contract or warranty. All orders are accepted
according to the standard terms of our general sales and delivery
conditions (available upon request). The information in this document
is subject to change without notice. The most recent version of this
manual is always available at www.markclimate.com/downloads.
1
Advertenties
