Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
TROUBLESHOOTING GUIDE
• Is there a power failure?
• Is a defrosting operation in progress?
• Has fresh food recently been introduced?
• Is the appliance lid properly closed?
• Is the appliance placed near a heat source?
• Are the ventilation grille and condenser clean?
• Contact the After-Sales Service.
3. The appliance is too noisy.
• Is the appliance perfectly horizontal?
• Is the appliance in contact with other furniture or
objects that may cause vibrations?
• Has the packaging been removed from under the
appliance?
Note: Gurgling noises from the refrigerating circuit
after the compressor cuts out are perfectly normal.
working.
• Is there a power failure?
• Is the plug properly inserted in the socket?
• Is the electric cable intact?
• Contact the After-Sales Service.
The compressor runs continuously.
• Have hot foods been put in the appliance?
• Has the appliance lid been left open for a long
time?
• Is the appliance placed in a very warm room or
near heat sources?
• Has the fast freeze function been activated? (the
7. Too much ice on the upper edge.
• Are the defrost water drainage plugs correctly
positioned?
• Is the appliance lid properly closed?
• Is the appliance lid seal damaged or deformed?
(See chapter "Installation")
• Have the 4 protection pieces been removed?
(See chapter "Installation")
8. Formation of condensate on the external walls
of the appliance.
• It is normal for condensation to form under
certain atmospheric conditions (humidity above
85%) or if the appliance is located in a damp or
poorly ventilated room. The performance of the
9. The layer of ice on the internal walls of the
appliance is not uniform.
• This phenomenon is quite normal.
Advertenties
Inhoudsopgave
