Download Inhoudsopgave Inhoud Print deze pagina

THOMSON TCH 316E Handleiding pagina 21

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

INSTRUCTIONS FOR USE
DIAGRAM OF THE APPLIANCE (Fig. 1)
A. Handle.
B. Safety lock (if provided).
C. Gasket.
D. Separator (if provided).
E. Defrost water drain plug.
F. Control panel.
G. Side motor cooling grille.
DIAGRAM OF THE CONTROL PANEL (Fig. 2)
1. Red light:
condition (see paragraph "TROUBLESHOOTING
GUIDE").
2. Blue light: The function "Sensor" is automatically
activated and does not need to be selected by
the blue LED (2) "Sensor"
always remains on
refer to paragraph "Sensor function".
3. Green lights: indicate that the product is running
and the temperature has been set.
4. Set temperature button: to adjust the set
temperature and to activate/deactivate fast freeze
procedures.
INSTALLATION
• Unpack the appliance.
• Remove the 4 spacers inserted between the
door and the appliance. (Fig 3)
• Make sure the defrost water drain plug (if provided)
is correctly positioned (E).
• For optimum appliance operation and to avoid
of at least 7 cm from the rear wall and 7 cm at the
sides. (Fig 4)
• Fit the accessories (if provided).
• Clean the inside of the appliance before using it.
SWITCHING ON THE APPLIANCE
• Plug in the appliance.
• The green LED lights up ("NORMAL").
• The blue LED lights up ("Sensor").
temperature inside the appliance is not yet
the appliance is switched on.
• Place food inside the product only when the red
Note:
be reopened immediately after closing. Wait a few
minutes before re-opening the lid of the appliance.
• This appliance features "skin condenser"
technology: the condensing unit is integrated
into the walls of the freezer. For this reason
the side and front walls of the product may
become hot while the product is running. This
is entirely normal and also reduces the risk of
condensation forming in particularly critical
environmental conditions (see paragraph
"Troubleshooting guide").
TEMPERATURE ADJUSTMENT
Use the key (4) to select the desired temperature.
follows:
• Repeatedly press the key (4). Each time the key is
succession.
• With partial loads "ECO." is recommended: this
setting will optimize energy consumption.
The green lights (3) indicate the selected setting as
follows:
Note: the settings will be saved in the memory
even if a power cut occurs. The time needed for the
can vary depending on climatic conditions and the
set temperature itself.
"SENSOR" FUNCTION
The 6th sense function is always active to control
the internal temperature of the appliance and
guarantee the optimum conditions.
It automatically intervenes in the following cases:
• door opening
This function activates every time the opening of
the door changes the internal temperature of the
appliance. The function remains active for the time
needed to reinstate optimum operating conditions.
• storing food inside the freezer
quantities of food are introduced. It remains active
for the time needed to reinstate optimum freezing
best compromise between the quality of the
freezing process and energy consumption.
Note: The duration of the "Sensor" function is set
the product is used.
FREEZING FOOD
Preparation of fresh food for freezing
they are suitable for freezing foods.
order to obtain high quality frozen food.
• Fresh vegetables and fruit should preferably be
frozen as soon as they are picked to maintain the
ECO.: less cold temperature
(left light on).
NORMAL: middle
temperature (right light on).
MAX: very cold temperature
(both lights on).
SHOPPING: Quick Freeze
(both lights on blinking). See
the section "Freezing fresh
food".

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Tch 395eTch 438e

Inhoudsopgave