Download Inhoudsopgave Inhoud Print deze pagina

Power Supply; Assembling The Tool - Elem Garden Technic THE450SP Instructies

Telescopische haagschaar
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Power supply

The hedge trimmer is designed for use only
with single-phase alternating current from a
230V 50Hz AC supply. It is totally insulated,
enabling it to be connected also to socket-
outlets without a PE conductor.
Before you use the hedge trimmer for the first
time, check that your mains voltage is the
same as the operating voltage specified on the
machine's rating plate.
Assembly
unpacking
This product requires assembly.
Carefully remove the product from the box.
Inspect the product carefully to make sure
no breakage or damage occurred during
shipping.
Do not discard the packing material until
you have carefully inspected and satisfactorily
operated the product.
If any parts are damaged or missing,
please contact your authorized service center.
If any parts are damaged
or missing, do not operate
this product until the parts
are replaced. Failure to
heed this warning could
result in serious personal
Do not attempt to modify
this product or create
recommended for use with
this product. Any such
alteration or modification
is misuse and could result
in a hazardous condition
leading to possible
serious personal injury.
Do not connect to power
supply until assembly is
complete. Failure to
comply could result in
accidental starting and
possible serious personal
injury.
accessories not
injury.

Assembling the tool

See Figure 2.
For the pole hedge trimmer, a one-time
assembly is required. The telescopic pole and
trimmer head come unassembled. Remove
from packaging and extend the telescopic pole
to its longest operating position as shown in
Figure 2 in the Operation section of this
manual.
The tubes are egg-shaped and will only fit one
way. Loosen the inner hexagon screw M6X20
with hex key, Insert the telescopic pole (9) into
(11), until the lock holes click into place, tighten
the inner hexagon screw M6X20 with hex key
and fixed three parts together.
NOTE: You may need to slightly rotate pole
from side to side until it locks into place.
Failure to lock telescopic
pole as directed above
could result in serious
Application range
The device is only determined for cutting and
trimming of hedges, bushes and shrubs around
your house. Any other usage, which do not
declared in this manual, can damage the
device and cause a serious danger to the
users.
The electric hedge trimmer is designed for use
by adults. Adolescents over 16 years may use
it only under supervision. The use of the
electric hedge trimmer in case of rain or humid
environment is prohibited.
The operator or user is responsible for
accidents or damage to other people or their
properties. The manufacturer is not liable for
any damages because of the usage against its
original functions or incorrect operation.
Connection
This hedge trimmer may only be connected to
single-phase AC socket-outlet. Ensure that the
mains voltage is the same as the operating
voltage indicated on the rating plate.
injury or death.
31

Advertenties

Inhoudsopgave
loading

Inhoudsopgave