Installing The Heatsink Assembly-Discrete - Dell Latitude 5411 Servicehandleiding
Verberg thumbnails
Zie ook voor Latitude 5411:
- Installatiehandleiding (40 pagina's) ,
- Handleiding (42 pagina's)
Inhoudsopgave
Advertenties
NOTE:
Remove the screws in the order of the callout numbers [1, 2, 3, 4, 5, 6, 7] as indicated on the heatsink.
4. Lift the heatsink assembly out of the computer.
5. Remove the single (M2x3) screw that secures the heatsink fan to the heatsink.
6. Lift the heatsink fan away from the heatsink.
Installing the heatsink assembly-discrete
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the heatsink and provides a visual representation of the installation procedure.
Steps
1. Align the screw hole on the heatsink with the screw hole on the heatsink fan.
2. Replace the single (M2x3) screw to secure the heatsink fan to the heatsink.
3. Locate the heatsink assembly slot on your computer.
36
Demonteren en hermonteren
Advertenties
Inhoudsopgave
