Installing the Hard drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the HDD and provides a visual representation of the installation procedure.
Steps
1. Locate the system board slot on your computer.
2. Align and install the HDD into the computer
3. Install the four (M2x2.7) screws that secure the HDD to the computer.
4. Connect the HDD cable on to the connector on the system board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
After working inside your
computer.
Warmteafleidereenheid (UMA)
De warmteafleidereenheid verwijderen (UMA)
Vereisten
1. Volg de procedure in
Voordat u in de computer gaat
werken.
2. Verwijder de onderplaat.
3. Verwijder de
batterij.
30
Demonteren en hermonteren