Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. INSTALLATION INSTRUCTIONS
Before using your temperature control cellar
Remove the inner and outer packaging.
Allow the appliance to rest for two hours before switching it on.
Clean the inside using a soft cloth and lukewarm water.
Using your temperature control cellar:
The appliance must be positioned in a room with an ambient temperature within a range of 20 to 25°C.
If the ambient temperature is higher or lower, the appliance's performance may be affected and it may not be
possible to obtain temperatures between 14 and 18 degrees.
Installing your temperature control cellar:
This appliance is designed for free-standing installation.
Position it in a place with sufficient strength to support its weight when loaded. To ensure that it is level,
adjust the height of the feet underneath.
To get the best from your appliance with the lowest energy consumption, do not place the appliance
close to a heat source (heater, cooker, etc.), do not expose it to direct sunlight, and do not place it in a
room which is too cold.
Connect the appliance to a single socket, leaving a 10 mm gap between the back of it and the wall. Be
careful to support it, so that it is perfectly level. (Use of a spirit level is recommended). This will prevent
any movement due to instability, causing noise and vibration, and will ensure that the door seals
perfectly.
Control panel
17
Advertenties
Inhoudsopgave
