Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Care and maintenance
Danger!
Prior to all servicing:
Switch machine OFF;
-
Wait for saw blade to complete stop;
-
-
Unplug power cable;
1.
Check that all safety devices are operational again after each service.
2.
Replace damaged parts, especially safety devices, only with genuine replacement parts since parts not tested
and approved by the equipment manufacturer can cause unforeseeable damage.
3.
Repair and maintenance work other than described in this section should only be carried out by qualified
specialists.
4.
Saw blade change
Danger!
Directly after cutting the saw blade can be very hot – burning hazard! Let a hot saw blade cool down.
Do not clean the saw blade with combustible liquids. Risk of injury, even with the blade at standstill. Wear
gloves when changing blades.
When assembling, observe the direction of rotation of saw blade!
1.loosen all coach screws , washers, locking nuts on right blade outer guard. And remove the right outer blade guard.
2.
Loosen 2 semicircle groove head screw and 2 spring washer , 2 washer on the blade inner guard
Coach screw
- 83 -
Advertenties
Inhoudsopgave
