Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1， ， ， ， Cutting
1.
Start machine and let the motor reach full speed.
2.
Place a log on the
working table
3.
To make the cut, push the
Exert only so much pressure that the motor speed does not fall off.
-
Push feed
working table
-
4.
Return
working table
Note:
If the log was not completely separated, turn it over and repeat the cutting operation from the opposite
side (reversing cut).
1.
Remove the cut off piece from the feed rock – make next cut...
2.
If no further cutting is to be done immediately afterwards, turn machine OFF.
working table
with both hands at the handle towards the saw blade:
until it hits the stop.
completely to the starting position.
- 82 -
Advertenties
Inhoudsopgave
