CAISSON VI-D3 Handleiding pagina 4
Vochtindicator voor hout
Verberg thumbnails
Zie ook voor VI-D3:
- Gebruikershandleiding (4 pagina's) ,
- Gebruiksaanwijzing (2 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
HOLD
When you slide the switch in the 'off'- position the display will blink for ±15 seconds before
switching off. During this time the display will indicate and hold the highest reading. This function
can be used to perform measurements in hard to reach places.
GENERAL
The indicator reacts to metal in the same way as
it does to moisture. If in the material to he
investigated there is, for example, a nail,
reinforcement or other metal object within the
radiation range, the indicator gives a too-high
result. The same applies to Estrich-sand with
metal components. A correct indication is
therefore impossible.
When the CAISSON indicator is not used for a
prolonged period of time, we recommend that
you should remove the battery.
The CAISSON indicator is not a MEASURING
INSTRUMENT and cannot and may not be used
as such! We do not accept any responsibility for
damage that may result from wrong or improper
use, or from interpreting the indicator as a
measuring instrument.
Protect the indicator from bright sunlight, heat, water, snow or ice.
CAISSON Elektronik GmbH
Boschstrasse 16, D-47533 Kleve, Deutschland
tel: +49(0)2821-894390
info@caisson-gmbh.de www.caisson-gmbh.de
Advertenties
Inhoudsopgave
