Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Mode (Fan Function):
•
There are three fan functions: Continuous (normal), Natural, and Sleep. Press the «MODE» button to
cycle through the options.
Natural Wind: Indicated by the tree symbol. The fan operates with varying speeds and switches on/off
•
with a change every 2-3 seconds.
Sleep Wind: Indicated by the moon symbol. On high speed, the first half hour operates as high Natural
•
wind, the second half-hour operates as medium speed Natural wind, after which time it operates as
low-speed Natural wind. On Mid-speed, the first half-hour operates as mid-speed Natural Wind, after
that, it continues to operate as low-speed Natural wind. On Low speed, it operates as low-speed
Natural wind continuously. Continuous (Normal) Wind Function: Activated after the third press of the
«MODE» button.
Heating Selection:
•
To activate the heating function, push the «HEATING» button to cycle between Low and High heat.
Note: When using the heating mode for the first time, or after a long period of storage, it is normal for
•
the heater to emit a burning odor due to lubricants used during production or from dust deposits. This
will pass quickly. Ensure good ventilation.
Remote Control:
•
Align the emitter of the front section of the remote control with the receiving window of the fan body
(near the display screen).
•
The remote control operates within an approximate distance of 5m and within an angle range of 30
degrees.
•
All functions described can be activated/controlled using the remote control.
Battery Precautions
WARNING! Keep batteries out of reach of children. Swallowing may lead to serious injury or death in as
•
little as 2 hours due to internal burns. If swallowed, go straight to a hospital.
Battery Fitment/Replacement
For first use or if the battery becomes flat, gently press on the upper portion of the battery cover, push,
•
and slide to remove the cover and access the battery compartment at the backside of the remote
control.
•
Fit 2 x AAA type batteries carefully observing the battery polarity markings.
•
Slide the battery cover back into the compartment of the remote control and make sure it has securely
locked in position.
CARE AND MAINTENANCE
WARNING!
Before cleaning, maintenance, or moving the appliance, switch off and unplug it from the wall outlet.
•
•
Do not immerse the appliance in water or other liquids. Do not spray it with liquids. Do not allow water
to drip on or into the housing.
•
Never use petrol, solvents, harsh detergents, or abrasive or alkaline cleaners on the fan.
Cleaning and Maintenance
•
Dusting: Clean your fan periodically by lightly running a vacuum cleaner nozzle (soft brush) over the
front outlets and rear grilles to remove any dust or dirt that may have accumulated inside or on the unit.
Alternatively, use a soft, dry cloth for dusting.
•
Stubborn Stains: Use a slightly damp, soapy cloth for stubborn stains, but be sure the cloth is not too
wet. Use caution around the housing. Do not allow the electrical components to be exposed to water.
•
Storage: If not in use for an extended period, store in a safe, dry location, protected from dust and
located so it is not in direct sunlight. We recommend using the original carton for storage of the
disassembled product (follow the assembly instructions in reverse order to disassemble). Alternatively,
place a large plastic bag or piece of material over the top of the cleaned appliance for dust protection.
•
Service/Repair: The appliance requires no maintenance and contains no user-serviceable parts. Do
not attempt to take the motor unit apart, repair, or modify it. Do not operatethe fan if its power cord or
Advertenties
Inhoudsopgave
