Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
How to Use
Agitator
Usage method
1. Select an appropriate mixer and install it into the cup body (see the function above
for reference)
2. Pour the milk into the milk frother cup, and note that the milk volume cannot exceed
the mark (see the maximum volume above for reference)
Function operation:
1. Put the milk frother on the power supply base, and all the indicator lights
will flash and then go out to enter the standby mode.
2. Press the power key once, the hot stir multi bubble indicator flashes, and
wait for the gear function selection operation.
Function selection:
1. Hot stirring with many bubbles: put 115ml pure milk into a cup. When the
indicator light is flashing, press the power switch key. The first white
indicator light is always on. Three seconds later, the motor starts to rotate,
the heating plate starts to heat, the working time is 80~140s, and the light
flashes 5 times after the work is completed.
Function
Hot stirring
and bubbling
Hot stir small
bubbles
Hot agitation
Cold agitation
4
Milk volume
About 115ml
About 115ml
About 240ml
About 115ml
Working hours
80-140s
80-140s
150-250s
60-65s
Advertenties
Inhoudsopgave
