Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7. Manual Cook Mode
1. Pressing the
2. During this mode, remaining cooking time displays. The fan and oven lamp will work.
3. When cooking program finish, the oven will enter End of Cook Cycle Mode.
If you press
8. End of Cook Cycle Mode
1. After the time has expired in a Manual Cook Mode, or a Preset Program Cook Mode,
the oven shall go into The End of Cook Cycle Mode.
2. During this mode, "DONE" displays.
3. If either User Option OP:11 or "OP:12" is selected, the oven shall continue to sound until the user ac-
knowledges this by either opening and then closing the door or pressing the
If User Option OP:10 is selected, after the 3 seconds beep, the oven shall go into Idle Mode.
9. Preset Program Cook Mode
1. This mode allows cooking of food items through a one pad touch operation.
While in Ready Mode, pressing one of ten digit keys on the keyboard will cause the oven to run the
Preset Program associated with that key.
2. The oven displays the remaining cooking time. If it is multi-stage cooking, the total remaining cooking
time displays not a particular stage cooking time.
3. When cooking program finish, the oven will enter End of Cook Cycle Mode.
4. If you press
10. On the Fly Cooking
1. While the oven is cooking or under Pause Mode, if User Option OP:51 is selected press number buttons,
the preset cooking program will start automatically.
2. LED displays the remaining cooking time.
3. When cooking program finish, the oven will enter End of Cook Cycle Mode.
If you press
11. Programming Mode
This mode allows the user to assign cook times and power levels to the once touch button.
1. Open the door and press "1" for 5 seconds, the buzzer will sound once and enter to Programming
Mode.
2. "PROGRAM" displays.
3. Press any number ,0 to 9,and the LED will display the saved time, then you can input the time you need.
4. Press
,
,
If the same button pressed twice, the power will change to PL10. If no power chosen, "PL10" is default.
5. To change the cooking factors: If press "X2",LED will display "CF:XX". The default factor is 80%.
"CF:80" displays. If you need to change the cooking power, just press one of the number buttons to set.
6. After setting the time and power, press
When the program saved, "PROGRAM" displays.
7. If all the cooking time exceeds the MAX.time User Option 7 , when press
the buzzer will sound three times briefly to tell you the time is no use.
And then LED turn back to show "PROGRAM". The time set before will be no change.
24
pad will cause to the oven to begin Manual Cook Mode.
button under this mode, the oven will enter Pause Mode.
button under this mode, the oven will enter Pause Mode.
button under this mode, the oven will enter Pause Mode.
or
to input the power level. LED will display the related power.
in 30s, the cooking program will be saved.
pad.
to save the program,
688212 nl en ma 2016
Advertenties
Inhoudsopgave
