EXTERNAL EQUIPOTENTIAL
Earthing Terminal
Equipment has secondary earthing terminal. Terminal provides external earthing connection used in addition to
earthing prong on plug. Located on outside of oven back, terminal is marked with symbol shown below.
CLEANING INSTRUCTIONS
Always keep the oven clean
1. Cleaning the glass viewing window, the inner door panel and oven front face.
For best performance and to maintain the high degree of safety, the inner door panel and oven front
face should be free of food or grease build-up. Wipe these parts with a mild detergent, rinse and wipe
dry. Never use abrasive powders or pads.
2. Cleaning the control panel and plastic parts.
Do not apply a detergent or an alkaline liquid spray to the control panel and plastic parts, as this may
cause damage to these parts. Use a dry cloth (not a soaked cloth) to clean these parts.
3. Cleaning the oven interior
After use be sure to clean up spilled liquids, spattered oil and food debris as quickly as possible. If the
oven is used when dirty, efficiency drops and the dirt gets stuck on the oven surface and may cause
bad odours. Clean the interior with a cloth soaked in luke-warm water with a mild detergent dissolved
in it, then rinse the soap off with a damp cloth.
CAUTION:
Do Not wipe plastic and painted sections of the oven with bleach, thinners or other cleaning agents,
as this may cause these parts to dissolve or change sharp.
OPERATION
Control Panel and Features
(2)
(1)
(4)
688212 nl en ma 2016
(export only)
(1) Power Buttons
(2) Time cook Button
(3) X2 Button
(4) Stop/Reset Button
(5) Start Button
(6) Number Button
(6)
(3)
(1)
(5)
21