Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Avoid damage!
• The product is only suitable for
irrigation with cold water.
• WARNING! Turn off the tap
after each use.
• Do not grease or oil the spray
nozzles because they may
clog.
• Clean the unit connection from
time to time to ensure the hose
connection fits tightly.
• Check the product for damage
or wear before each use. Use
the product only if it is in good
working condition!
• Check to see if the product
shows signs of damage. If any
damage is apparent, do not
use the product. Contact the
manufacturer at the service
address provided.
Use (Fig. A)
Note: The product has a hose
connection for common hose
systems.
1. Connect the garden hose (not
included) to the water tap.
2. Connect the other end of the
garden hose to the connector
(1d) on the product (1).
Note: The hose connection must
audibly click into place.
6
GB/IE/NI
3. Check that it is firmly in place.
4. Turn the tap on just a little at
first and increase the water
pressure steadily.
5. Open the valve by lightly
pressing the trigger (1c). Then
turn the spray head (1a) to the
spray setting you want until
water starts to flow.
Note: Press in to lock the trigger.
This makes a sound when it enga-
ges. Press it again to release. The
trigger makes a sound when it
disengages.
6. Change the spray pattern by
selecting one of six settings:
• Cone jet (1e)
• Medium jet (1f)
• Soft jet (1g)
• Fine spray (1h)
• Strong jet (1i)
• Flat jet (1j)
7. To adjust the intensity of the
water jet, use the thumb lever
(1b):
• Thumb lever down: water jet
reduces.
• Thumb lever up: water jet
increases.
8. Turn off the water supply by
closing the tap or releasing the
trigger when you no longer
need the product.
Advertenties
Inhoudsopgave
