battery does not achieve maximum capacity until after several
charge and discharge cycles.
In summer a completely drained rechargeable battery takes about
2 to 4 days to fully recharge in constant sunlight. To switch the
product off, press the ON / OFF button
Installation (see Fig)
1. Insert the pole
the ground spike
2. Push the ground spike
etc.).
3. You can fix the LED solar light chain
face, twist on the tree or railing by using the mounting material
such as cable tie (mounting material is not included).
Note: Ensure the product is stable. Do not use force when
assembling or setting up the prod uct e.g. hammer blows. This
will damage the solar panel
Note: For the best results, put the product in a place where
the solar panel
possible. Do not put the product under bushes, trees, canopies
etc. as this reduces the incidence of incoming sun light. Position
the product in such a way that the solar panel
ered or in the shade.
Note: Make sure the solar panel
light sources, e.g. yard- or street light ing, or the product will
not switch on at twilight.
into the ground spike holder
7
into the pole
8
into the ground (lawn, flower bed,
8
6
is exposed to di rect sunlight for as long as
6
for 1 time again.
1
.
7
on the desired sur-
9
.
6
is not impacted by other
6
and insert
5
is not cov-
GB/IE/NI
11