Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
˜ Assembly
NOTE: Remove all packaging materials
from the product.
1. Loosen the lock nut
2. The stand
is delivered in 2 parts. One
[
4 ]
part includes 2 hole, the second part
contains 2 cutouts
and 2 cutouts
then push 2 half into place
6 ]
[
(Fig C).
3. Align the power cord
on the stand
. Slide the central hole in the
4 ]
[
stand
over the thread as far as it goes
4 ]
[
(Fig D).
4. Tighten the lock nut
on the thread (Fig B).
5 ]
[
. Align the stand
6 ]
[
4 ]
[
with the cord notch
3 ]
[
on the thread (Fig E).
5 ]
[
˜ Operation
1. Place the product on a flat, stable surface.
2. Connect the power plug
socket outlet.
Switching on and off
To switch the product on, turn the timer +
rotary switch
to ON.
1f ]
[
To switch the product off, turn the timer +
rotary switch
to OFF.
[
1f ]
Choosing the speed
Speed 1
: press button1 until it locks.
1c ]
[
Speed 2
: press button2 until it locks.
1d ]
[
Speed 3
: press button3 until it locks.
[
1e ]
To stop the air circulation, press the off
button
.
[
1b ]
Setting the timer
To switch the timer on, turn the timer +
rotary switch
to a position between off
[
1f ]
and 120 (these values are corresponding
approximately to minutes). The device
switches on.
The product turns to off automatically once
the set time has elapsed.
To switch the timer off, turn the timer + rotary
switch
to OFF.
1f ]
[
Turning the oscillation mode on/off
Press the oscillation button
position to switch oscillation on.
Press the oscillation button
switch oscillation off. The oscillation button
toggles back to upper position.
to a suitable
3 ]
[
to the lower
1a ]
[
again to
1a ]
[
GB/IE/NI
11
Advertenties
Hoofdstukken
Inhoudsopgave
