Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
b) Connecting the radio receiver
☞
Place the radio receiver near to the screen but not on the screen. This could
interfere with the transmission.
The most favourable location is about 1 m to 2 m above the floor (for better
reception conditions).
- there must be a mains socket in the vicinity of the reception location.
• Connect the jack plug of the AV cable to the AV output (3) of the radio receiver.
• Connect the cinch plug of the AV cable to the cinch input on your screen (white plug = audio,
yellow plug = video).
• Connect the low voltage plug of the supplied power unit to the power supply (2) on your radio
receiver.
• Plug the power unit into a suitable mains socket.
• The radio receiver is now ready for use.
To avoid distortion or mismatching that could damage the device, the audio
connecting plug (white) may only be connected to an audio cinch input.
The video connector (yellow) may only be connected to an RCA video input.
If you are not clear about the correct connection, contact our technical support
or another specialist.
☞
For any extension, only use the shielded cinch cables suitable for this. The use
of other cables could cause interference. Keep the length of the cable as short
as possible.
49
Advertenties
