Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2
appliance description
1.
Top panel
2.
Freezer compartment
3.
Interior lighting
4.
Thermostat
5.
Glass shelves
6.
Drain outlet
7.
Vegetable drawer
8.
Adjustable feet
9.
Bottle rack
10. Door compartments
11.
Handle
3
before the first use
Before you use the appliance for the first time, please do as
follows: Carefully unpack the appliance and remove all the
packaging material. Keep the material (plastic, polystyrene and
cardboard) out of reach of children. Check the appliance after
unpacking for any damage, possible from transportation. Place
the appliance on a flat and stable surface. Make sure there is
enough open space around the appliance for the intake and/or
outlet vents. A minimum clearance of 10 cm is required between
the appliance and any adjacent walls. The refrigerator needs
good ventilation for easy dissipation of heat, high efficiency of
refrigeration and low power consumption.
You can level the appliance using the adjustable feet.
Do not place the appliance near a heat source such as a heater
or furnace.
Mount the enclosed handle on the desired side of the door with
the enclosed screws and place the enclosed caps on the other
side for a nice finish. Attention: never lift the refrigerator by the
handle.
Leave the appliance to stand for at least 3 hours before you
insert the plug into the socket.
First clean the interior of the appliance. Use warm water and a
neutral detergent. After cleaning, rinse the interior with clean
water and rub dry. Leave the appliance to dry for 1 to 2 hours.
The appliance features internal controls. Set the thermostat
on setting 3. Check that the voltage in your home corresponds
with the voltage printed on the back of the appliance and plug it
in a socket. The appliance now cools continuously until the set
KV552-KV601-instructions-0115.indd 15
1
2
3 & 4
5
6
5
7
8
8
temperature has been reached. Do not place anything in the
refrigerator until the set temperature is reached. This usually
takes 2 or 3 hours. Then set the thermostat at the desired
setting and place food into the refrigerator.
4
using cooling compartment
Setting 1 = lowest cooling setting (highest temperature)
Setting 7 = higest cooling setting (lowest temperature)
For appliances with a freezer compartment a setting between
4 and 7 is advised when frozen products are stored for a longer
period.
The light on the inside will now light up
every time you open the door.
Note:
The ambient air temperature, how often the door is opened
and the position of the appliance can affect the internal
temperature. These factors must be taken into account when
setting the thermostat.
• Do not put hot food into the refrigerator.
• Never introduce volatile, inflammable or explosive fluids
such as alcohol, acetone or petrol because of the risk of
explosion.
• It is advisable to wrap meat and fish to avoid odours.
• Leave sufficient space between the food to enable air to
circulate correctly between them. Similarly, when storing
them, avoid puttin food items in contact with eacht
other.
• Do not place food items in contact with the cold wall
at the back of the refrigerator. The shelves have a stop to
avoid this.
• The door should not be left open any longer than
necessary.
10
11
10
9
3
15
English
•
26-1-2015 13:59:48
Advertenties
Inhoudsopgave
