Download Inhoudsopgave Inhoud Print deze pagina

Smeg C7280NLD2P1 Gebruiksaanwijzing pagina 31

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

What to do if...
Problem
The appliance does not op‐
erate.
The appliance is noisy.
Audible or visual alarm is
on.
A
or
symbol is shown
instead of numbers on the
Temperature Display.
The lamp does not work.
The compressor operates
continually.
Possible cause
The appliance is switched
off.
The mains plug is not con‐
nected to the mains sock‐
et correctly.
There is no voltage in the
mains socket.
The appliance is not sup‐
ported properly.
The cabinet has been re‐
cently switched on or the
temperature is still too
high.
The temperature in the ap‐
pliance is too high.
The door is left open.
The temperature in the ap‐
pliance is too high.
Temperature sensor prob‐
lem.
The lamp is in stand-by.
The lamp is defective.
Temperature is set incor‐
rectly.
Many food products were
put in at the same time.
The room temperature is
too high.
Solution
Switch on the appliance.
Connect the mains plug to the
mains socket correctly.
Connect a different electrical
appliance to the mains socket.
Contact a qualified electrician.
Check if the appliance stands
stable.
Refer to "Door open alarm" or
"High temperature alarm".
Refer to "High temperature
alarm".
Close the door. Refer to "Door
open alarm"
Contact a qualified electrician
or contact the nearest Author‐
ised Service Centre.
Contact the nearest Author‐
ised Service Centre (the cool‐
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible).
Close and open the door.
Contact the nearest Author‐
ised Service Centre.
Refer to "Operation".
Wait some hours and then
check the temperature again.
Refer to climate class chart on
the rating plate.
31

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave