Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
WWW.PRIMO-ELEKTRO.BE
•
Remove all packing material, both inside and outside.
•
Clean the outside of the unit with a dry cloth. You can clean the inside with a
soft damp cloth.
•
Do not place the unit in a narrow passage, direct sunlight or moisture.
•
Make sure that air can circulate freely around the refrigerator. The back of the
refrigerator must be at least 13 cm away from the wall.
•
Place the refrigerator on a firm, flat surface.
•
Avoid direct sunlight and heat. Sunlight can damage the outside of the
refrigerator. Heat will cause higher consumption.
•
Avoid excessive humidity. Too much moisture in the air will cause frost to form
too quickly inside your refrigerator.
•
You can set the temperature at the back inside the unit with the thermostat
Before changing the direction of rotation, check that the plug is unplugged and
that the appliance is empty. It is recommended to use a Phillips screwdriver and a
spanner (both not supplied).
1.
Remove the hinge cover from the screws (3). Remove the screws (4) and then
the top hinge (5) that holds the door in place. Lift the door and place it on a
soft surface to avoid scratches.
2.
On the left side, remove the three cover caps (2) and move the black plastic
spacer (6) to the other side (1).
INSTALLATION
DOOR CONVERSION
39
PR127BC
Advertenties
Inhoudsopgave
