Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7
timer function
To have the coffee machine brew coffee automatically at the required time, you can set the timer function.
1. Prepare the coffee making process by following steps 1 to 8 from section making coffee with coffee beans and 1 to 7 from section
making coffee with extra fine grind.
2. Check that the time is set correctly. If necessary, you can adjust the time, as shown in section setting the clock.
3. Then hold down button
4. Set the required start time. Press button
the correct number of minutes.
5. Press the
button to confirm the start time and switch on the timer function.
When the timer function is switched on, a clock symbol appears on the display and the indicator led at button
coffee machine will now make coffee at the time set by you. After switching on the timer function, the display automatically
switches to the standby position if it is not used within a period of 1 minute. Any set indicator lights continue to light up. The display
will be activated again once the set time has been reached.
If you want to switch off the timer function after setting it, press button
the timer function is switched off. If you press button
want to adjust the time, hold down the button for 2-3 seconds, as described above.
8
switching off
When the appliance is switched on and is not being used for 1 minute, the display automatically switches to the standby position. Any
set indicator lights continue to light up. After 35 minutes of keeping warm, the appliance also switches to the standby position auto-
matically. Press button
strength setting.
Attention! If you want to switch off the appliance completely, you must remove the plug from the socket. The hot plate cools down
slowly after switching off and could remain hot for some time.
Do not forget to remove the paper filter bag and throw it away or to remove the permanent filter and rinse it clean. Swing open the
filter holder and remove the filter. Throw away the filter bag. When using the permanent filter, empty it, clean it and use it again.
Allow the appliance to cool down properly first, before removing the filter.
Attention: This coffee machine comes with a drip stop. This means that the flow of coffee is stopped immediately when the glass
jug is removed. The filter holder is closed off, as a result of which the flow of coffee is stopped. Be sure to place back the glass jug
as quickly as possible to prevent the filter from overflowing. When making coffee, do not touch the cover to prevent burns due to
hot steam.
9
cleaning and maintenance
Regularly clean the coffee machine. This is not only beneficial for the life span of the appliance, it also ensures optimum use of the
appliance and, of course, good tasting coffee.
Cleaning should involve the following:
• Prior to cleaning, always check that the coffee machine is switched off, cooled down and that the plug has been removed from
the socket.
• Remove all separate components of the appliance and clean them after each use in hot water and a mild washing-up liquid.
Then rinse thoroughly with hot water and wipe dry.
• Regularly clean the outside of the appliance and the hot plate with a slightly damp cloth and then wipe it dry with a dry cloth.
Clean the interior of the bean reservoir in the same way.
Attention! The grinding system in the coffee bean holder is very sharp. Avoid touching it.
• Place back all components correctly in the appliance.
Attention:
• Never use aggressive and/or abrasive cleaning agents when cleaning.
• Never submerge the appliance, cord or plug in water.
for about 2-3 seconds to set the timer function. The clock starts to flash.
to set the correct hour (the clock has a 24 hour format) and press button
to activate the appliance again, but do note that in this way you will also immediately adjust the coffee
once more. The indicator led switches off, indicating that
once more, the timer function is switched back to the already set time. If you
to set
lights up. The
17
English
•
Advertenties
Inhoudsopgave
