Do not operate the product
with an empty spray tank .
It is necessary to provide the
appropriate training in safe
operation .
Do not use the product
while tired, ill or under the
influence of alcohol, drugs or
medicaments .
Always carry out a visual
inspection before using the
product . Do not use the
product if it is damaged . If
the product is damaged,
have it checked by qualified
personnel .
Always check the product for
leaks . If any are found, correct
them before using the product .
When assembling or removing
accessories, do not point them
towards yourself or other
persons .
The product must only be
operated by 1 person at a
time . Nobody else must be
within a radius of 15 metres at
the same time .
If there is no spray coming out
from the nozzle or the spray
amount is decreased, the hose
and spray system may be
blocked . Rinse and clean all
parts of the hose and spray
system with clean water .
16 GB/IE/NI
After the product has been
stored for a long time (e .g .
during winter), fill the spray
tank with clean water . Carry
out a test run to check if there
are any leakages or cracks .
Release the residual pressure
in the spray tank after each
use and especially before
removing the spray tank cover .
Do so by pressing the trigger .
Do not modify the product
under any circumstance .
Modifications may result in
serious injury .
All servicing and maintenance,
other than the items listed
in this instruction manual,
should be performed by an
authorised service centre .
Only use spare parts and
accessories provided by the
manufacturer . All other repairs
shall only be carried out by
an authorised service centre .
Improper maintenance, use of
non‑conforming components
and removal of safety devices
can lead to a hazardous
situation, such as death,
life‑threatening injuries and
damage .
Pay attention to the volume
application rate during
operation .