Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Index
Warnings
THE MANUFACTURER IS NOT RESPONSIBLE TO CHANGES AND ERRORS
OF HYDRAULIC AND ELECTRICAL CONNECTIONS.
- The device must be installed according to national safety rules, please contact the seller
or qualified specialists.
- If the following instructions or improper use of the device are not followed, the warranty
will be void.
- The maintenance must be performed by qualified specialists only.
- Unplug the power supply before maintenance operations or when accessing internal
parts of the unit.
- Do not install or use damaged devices.
- In case of malfunction, switch off the unit, unplug the power supply and turn to the seller
or qualified specialists.
- Eliminate packaging material following the environmental regulations.
UNIT ACCEPTANCE, HANDLING AND STORAGE
- At the time of the delivery, verify the correspondence between the order and the
indication of the delivery note;
- Check the condition of the packaging and in case of damage this must be reported on
the delivery date and reported to the production company;
- The unit must be stored in spaces protected from bad weather with a temperature
between -10ºC and 55ºC;
- The handling and installation of the unit must be performed with the highest attention to
prevent the damage of fragile parts; these operations can be facilitated with the help of a
forklift.
- The cassette must be grasped at the 4 corners, do not lift or move the unit from the
hydraulic connections or the condensation drain.
The information in this document is subject to change without notice. The most recent
version of this manual is always available at www.markclimate.com/downloads.
2
2
3
3
4
5
6
6
7
7
8
9
26/27
Advertenties
Hoofdstukken
Inhoudsopgave
