Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Crivit CEK 22 A1
To clean the lid [2], use a slightly dampened cloth. Never use any solvents or cleaners that may
damage the plastic. You can clean the ventilation slots on the lid [2] carefully with a soft brush.
Clean the inside of the coolbox with washing-up liquid and then rinse out with clean water. Then dry
the coolbox off thoroughly.
After cleaning, replace the lid [2] by moving it towards the coolbox in a 45° angle. Place the lid [2]
first into the left-hand opening and then push it down into the right-hand recess [7].
9. Storage when not in use
If you do not wish to use the coolbox for an extended period, remove all contents. Disconnect the
coolbox from the power supply and store the connection cable in the cable box [3]. Store the coolbox
in a clean, dry place out of direct sunlight. Leave the lid [2] open when in storage to ensure the
coolbox is well ventilated. You can hold the lid open [2] using the lock [6]. Refer to the illustration on
the manual cover.
10. Troubleshooting
The coolbox does not work.
• Check that the cigarette lighter plug [1] is correctly inserted into the cigarette lighter socket.
• Switch on your vehicle ignition as many vehicles only supply electricity to the cigarette lighter
socket when the ignition is on.
• The fuse [8] is faulty. Replace the fuse [8] by following the instruction in chapter "8.2 Replacing
the fuse".
The coolbox is not cooling properly.
• Move the coolbox to a cooler position. Make sure that the coolbox is not exposed to direct
sunlight.
• Make sure that the ventilation slots are not covered and there is sufficient room for air to circulate.
The coolbox is not warming properly.
• Make sure that the ventilation slots are not covered and there is sufficient room for air to circulate.
12 - English
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
