Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
0534429-BA-Gummi-Baustromverteiler.qxp 04.04.24 15:17 Seite 17
WARNING
Material damage to the protective device due to faulty testing
Incorrect testing can damage protective devices.
For voltage tests with test voltages > 0.4 kV, switch off the residual current circuit breakers (FI/RCD) and the
upstream or downstream miniature circuit breakers beforehand.
CLEANING AND CARE
The device can be cleaned using a dry or damp cloth depending on the conditions of use and the amount of
dirt. To prevent persistent dirt, we recommend regular cleaning with a dry cloth.
Remove all connected loads from the device before starting the cleaning work (see »Operation« section).
DANGER
Working at live parts may cause severe injuries or death.
– For wet cleaning, the device must be de-energized.
– Only clean the outside of the device and the parts (e. g. sockets).
– Do not open the device and keep the sockets closed.
– Never use steam cleaners or high-pressure cleaners.
– Unsuitable cleaning agents, cleaning equipment and excessive water may damage the device.
Dry cleaning
For dry cleaning, you can use a hand brush and a clean cloth.
– Remove dust and dirt using a hand brush first.
– Then wipe the device using a clean dry cloth.
Wet cleaning
Only use clean water for wet cleaning.
– Remove dust and dirt using a hand brush first.
– Then wipe the device using a clean damp cloth.
DECOMMISSIONING
DANGER
Working at live parts may cause severe injuries or death.
– Unplug all consumers
– Switch off all protective devices
– Disconnect the supply cable from power
Operating instructions
17
Advertenties
Hoofdstukken
Inhoudsopgave
